Alle internationalen Übungstests auf IG MARITIME stehen Seeleuten kostenlos zur Verfügung. Registrieren Sie sich einmal, um Ihren Fortschritt zu speichern und ohne Einschränkungen zu üben.

CD0015. Corrosion Protection I

Diesen Bereich durchsuchen

Wählen Sie einen Fragensatz und starten Sie den Lernmodus oder eine Probeprüfung.

Über diesen Fragensatz

Im Bereich Seagull CBT finden Sie Fragen zur eigenständigen Vorbereitung. Wählen Sie einen Fragensatz für den Lernmodus oder eine Probeprüfung.

„Seagull CBT — CD0015. Corrosion Protection I“ enthält 18 Fragen in 1 Sammlung.

Lernmodus

Der Lernmodus hat kein Zeitlimit. Nach jeder Antwort sehen Sie die Auswertung und die richtigen Optionen. Sie können Fragen und Themen wiederholen.

Probeprüfung

Eine Probeprüfung dauert bis zu 60 Minuten und umfasst bis zu 50 Fragen aus dem gewählten Satz. Die Lösungen und Ergebnisse erscheinen nach Abschluss.

Beispielfragen und Antworten

Diese Beispiele stammen aus dem Fragensatz. Wählen Sie den Lernmodus für die schrittweise Bearbeitung oder eine Probeprüfung zum Selbsttest.

What should be observed during application of convertible coating systems in cold weather?

Eine richtige Antwort

  • That the surface is dry
  • That sufficient curing time is allowed prior to application of the next coat
  • That sufficient curing time, above the minimum curing temperature of the coating, is allowed prior to application of the next coat.✓ Richtige Antwort
  • The correct ambient temperature.
What should be observed during application of convertible coating systems in cold weather?

Eine richtige Antwort

  • That the surface is dry
  • That sufficient curing time is allowed prior to application of the next coat
  • That sufficient curing time, above the minimum curing temperature of the coating, is allowed prior to application of the next coat.✓ Richtige Antwort
  • The correct ambient temperature.
What is the main single factor, which affects the cost of preparation and application to difficult vessel areas?

Eine richtige Antwort

  • The specialised labour required
  • The cost of the paint
  • The cost of access to an area✓ Richtige Antwort
  • The Weather condition
What type of corrosion on a coated deck-area would you most worry about?

Eine richtige Antwort

  • 3% scattered corrosion✓ Richtige Antwort
  • 6% localised corrosion
  • 1% localised pitting corrosion
  • Localised damage corrosion
What are the most important things to monitor when inspecting coating conditions?

Eine richtige Antwort

  • Inspect the areas only where coating has broken down
  • Inspect a typical area where you can access easily
  • Inspect both intact and corroded areas and also inspect angles, corners, behind bars etc.✓ Richtige Antwort
  • Inspect suspected areas only.

Vor dem Start

Muss ich mich vor dem Start registrieren?

Der Gastzugang dauert 23 Minuten. Registrieren Sie sich kostenlos, um weiterzulernen, den Fortschritt zu speichern und Fehler nachzuarbeiten.

In welcher Sprache sind die Fragen?

Fragen und Antwortoptionen bleiben in ihrer Originalsprache. Die Sprache der Oberfläche können Sie unabhängig davon ändern.

Kann ich das Ergebnis als offizielles Dokument verwenden?

Nein. Dies ist eine selbstständige Übung. Das Ergebnis ersetzt keine Prüfung, Bescheinigung oder Wissenskontrolle einer zugelassenen Stelle.