Alle internationalen Übungstests auf IG MARITIME stehen Seeleuten kostenlos zur Verfügung. Registrieren Sie sich einmal, um Ihren Fortschritt zu speichern und ohne Einschränkungen zu üben.

CD0014. Vessel Struct. Cond.

Diesen Bereich durchsuchen

Wählen Sie einen Fragensatz und starten Sie den Lernmodus oder eine Probeprüfung.

Über diesen Fragensatz

Im Bereich Seagull CBT finden Sie Fragen zur eigenständigen Vorbereitung. Wählen Sie einen Fragensatz für den Lernmodus oder eine Probeprüfung.

„Seagull CBT — CD0014. Vessel Struct. Cond.“ enthält 58 Fragen in 1 Sammlung.

Lernmodus

Der Lernmodus hat kein Zeitlimit. Nach jeder Antwort sehen Sie die Auswertung und die richtigen Optionen. Sie können Fragen und Themen wiederholen.

Probeprüfung

Eine Probeprüfung dauert bis zu 60 Minuten und umfasst bis zu 50 Fragen aus dem gewählten Satz. Die Lösungen und Ergebnisse erscheinen nach Abschluss.

Beispielfragen und Antworten

Diese Beispiele stammen aus dem Fragensatz. Wählen Sie den Lernmodus für die schrittweise Bearbeitung oder eine Probeprüfung zum Selbsttest.

With reference to static and dynamic forces acting on the hull, which one of the following statements is most accurate?

Eine richtige Antwort

  • High static forces, for instance due to poor cargo loading, mean that the vessel is less safe when operating in heavy weather✓ Richtige Antwort
  • Provided the maximum static loading for the hull has not been exceeded, the vessel should be safe in any weather conditions
  • Dynamic loads on the vessel are insignificant compared to the weight of cargo and ballast
  • Static forces on the vessel are insignificant compared to sea forces
Which one of the following statements is most accurate?

Eine richtige Antwort

  • The highest forces due to wave action occur when the distance between wave crests is equal to half the length of the ship
  • The highest forces due to wave action occur when the distance between wave crests is equal to twice the length of the ship.
  • The highest forces due to wave action occur when the distance between wave crests is equal to one quarter of the length of the ship.
  • The highest forces due to wave action occur when the distance between wave crests is equal to the length of the ship.✓ Richtige Antwort
For an evenly loaded built-in beam, which one of the following statements is most accurate?

Eine richtige Antwort

  • The bending stress is zero at mid length
  • The bending stress is zero at the ends
  • The bending stress is high at mid length and at the ends✓ Richtige Antwort
  • Bending stress is zero along the whole length
Which one of the following statements about forces on the hull is most accurate?

Eine richtige Antwort

  • Shear forces on the hull will tend to be high if one hold is fully loaded and the next is empty✓ Richtige Antwort
  • Shear forces on the hull will be tend to be high if all holds are evenly loaded
  • Shear forces on the hull will tend to be high if all holds are empty
  • Shear forces on the hull will tend to be low if one hold is fully loaded and the next is empty
Which one of these IMO publications requires that Bulk Carriers have a loading instrument?

Eine richtige Antwort

  • Load line
  • COLREG
  • SOLAS✓ Richtige Antwort
  • MARPOL

Vor dem Start

Muss ich mich vor dem Start registrieren?

Der Gastzugang dauert 23 Minuten. Registrieren Sie sich kostenlos, um weiterzulernen, den Fortschritt zu speichern und Fehler nachzuarbeiten.

In welcher Sprache sind die Fragen?

Fragen und Antwortoptionen bleiben in ihrer Originalsprache. Die Sprache der Oberfläche können Sie unabhängig davon ändern.

Kann ich das Ergebnis als offizielles Dokument verwenden?

Nein. Dies ist eine selbstständige Übung. Das Ergebnis ersetzt keine Prüfung, Bescheinigung oder Wissenskontrolle einer zugelassenen Stelle.