Alle internationalen Übungstests auf IG MARITIME stehen Seeleuten kostenlos zur Verfügung. Registrieren Sie sich einmal, um Ihren Fortschritt zu speichern und ohne Einschränkungen zu üben.

CD0007. Inert Gas Generator

Diesen Bereich durchsuchen

Wählen Sie einen Fragensatz und starten Sie den Lernmodus oder eine Probeprüfung.

Über diesen Fragensatz

Im Bereich Seagull CBT finden Sie Fragen zur eigenständigen Vorbereitung. Wählen Sie einen Fragensatz für den Lernmodus oder eine Probeprüfung.

„Seagull CBT — CD0007. Inert Gas Generator“ enthält 75 Fragen in 1 Sammlung.

Lernmodus

Der Lernmodus hat kein Zeitlimit. Nach jeder Antwort sehen Sie die Auswertung und die richtigen Optionen. Sie können Fragen und Themen wiederholen.

Probeprüfung

Eine Probeprüfung dauert bis zu 60 Minuten und umfasst bis zu 50 Fragen aus dem gewählten Satz. Die Lösungen und Ergebnisse erscheinen nach Abschluss.

Beispielfragen und Antworten

Diese Beispiele stammen aus dem Fragensatz. Wählen Sie den Lernmodus für die schrittweise Bearbeitung oder eine Probeprüfung zum Selbsttest.

What is the SOLAS requirement regarding non-return devices in the inert gas main for inert gas systems on oil tankers?

Eine richtige Antwort

  • There must be at least two devices one of which should be a water seal type.✓ Richtige Antwort
  • There must be at least two water seal type devices fitted.
  • There must be at least two neither of which should be a water seal type.
  • As long as there is a water seal no other devices are required
When considering an independent, oil fired inert gas generator suitable for service onboard an oil tanker what are the SOLAS requirements for the oxygen content of the inert gas supply?

Eine richtige Antwort

  • A maximum of 5%.✓ Richtige Antwort
  • A maximum of 8%.
  • A maximum of 11%.
  • A maximum of 3%.
When considering the automatic operation of an independent inert gas generator the start up sequence normally has delays built in to ensure correct timing of the sequence. For example there will be a delay in the sequence to ensure sufficient furnace purging time. How can these delays be ensured in manual mode?

Eine richtige Antwort

  • By the use of timed interlocks which operate even in the manual mode.✓ Richtige Antwort
  • The operator is relied upon to ensure the correct timing of the sequence.
  • The delays are only an extra safety precaution so it doesn’t matter if they missed out.
  • There is no need for any delays if the operator is in attendance during start up.
When considering an independent, oil fired inert gas generator, other than providing a vent to the atmosphere during start up of the plant, what is the other main purpose of the automatic atmospheric vent valve?

Eine richtige Antwort

  • It is used in conjunction with the inert gas main valve to regulate the pressure in the inert gas main.✓ Richtige Antwort
  • It acts as an inlet for fresh air to the system when gas freeing.
  • It acts as the main relief device in the event of overpressure.
  • It is used to control the capacity of the inert gas generator.
Which of the given options is the one that will most influence the combustion efficiency for the burner type described in this module?

Eine richtige Antwort

  • Distance from the main burner tip to the edge of the air cone.✓ Richtige Antwort
  • Distance from main burner tip to pilot burner tip
  • Distance from pilot burner tip to igniter.
  • Distance from pilot burner tip to edge of air cone.

Vor dem Start

Muss ich mich vor dem Start registrieren?

Der Gastzugang dauert 23 Minuten. Registrieren Sie sich kostenlos, um weiterzulernen, den Fortschritt zu speichern und Fehler nachzuarbeiten.

In welcher Sprache sind die Fragen?

Fragen und Antwortoptionen bleiben in ihrer Originalsprache. Die Sprache der Oberfläche können Sie unabhängig davon ändern.

Kann ich das Ergebnis als offizielles Dokument verwenden?

Nein. Dies ist eine selbstständige Übung. Das Ergebnis ersetzt keine Prüfung, Bescheinigung oder Wissenskontrolle einer zugelassenen Stelle.