Alle internationalen Übungstests auf IG MARITIME stehen Seeleuten kostenlos zur Verfügung. Registrieren Sie sich einmal, um Ihren Fortschritt zu speichern und ohne Einschränkungen zu üben.

MCQ: Unit 11 - Inspection

Diesen Bereich durchsuchen

Wählen Sie einen Fragensatz und starten Sie den Lernmodus oder eine Probeprüfung.

Über diesen Fragensatz

Im Bereich CompEx finden Sie Fragen zur eigenständigen Vorbereitung. Wählen Sie einen Fragensatz für den Lernmodus oder eine Probeprüfung.

„CompEx — MCQ: Unit 11 - Inspection“ enthält 14 Fragen in 1 Sammlung.

Lernmodus

Der Lernmodus hat kein Zeitlimit. Nach jeder Antwort sehen Sie die Auswertung und die richtigen Optionen. Sie können Fragen und Themen wiederholen.

Probeprüfung

Eine Probeprüfung dauert bis zu 60 Minuten und umfasst bis zu 50 Fragen aus dem gewählten Satz. Die Lösungen und Ergebnisse erscheinen nach Abschluss.

Beispielfragen und Antworten

Diese Beispiele stammen aus dem Fragensatz. Wählen Sie den Lernmodus für die schrittweise Bearbeitung oder eine Probeprüfung zum Selbsttest.

12) A close inspection is a grade of inspection which?

Eine richtige Antwort

  • (I) is carried out on part of the equipment in an installation;
  • (II) identifies, without the use of tools and access equipment, those defects apparent to the eye;
  • (III) is carried out on a regular basis;
  • (IV) includes those aspects covered by a visual inspection and in addition, identifies faults apparent only by the use of tools and access equipment.✓ Richtige Antwort
4) Fault-finding or testing in an hazardous area is permitted when?

Eine richtige Antwort

  • (I) A gas-free certificate has been obtained;✓ Richtige Antwort
  • (II) The equipment is flameproof Ex d;
  • (III) When the area of work has a gas monitor;
  • (IV) The equipment is pressurised Ex p.
9) Which one of the following is necessary to carry out a close inspection?

Eine richtige Antwort

  • (I) Continuity/insulation resistance tester;
  • (II) Tools;✓ Richtige Antwort
  • (III) A circuit diagram;
  • (IV) Isolation of the equipment.
3) A close inspection of an IS installation would reveal that?

Eine richtige Antwort

  • (I) Electrical connections are tight;
  • (II) Cable screens are earthed as per documentation;
  • (III) The installation is clearly labelled;✓ Richtige Antwort
  • (IV) There are no unauthorised modifications.
8) Which of the following statements represents a detailed inspection on flameproof equipment?

Eine richtige Antwort

  • (I) Enclosed break and hermetically sealed devices are intact;
  • (II) Internal battery satisfies installation requirements;
  • (III) Cable screens are earthed;
  • (IV) Apparatus circuit identification is correct.✓ Richtige Antwort

Vor dem Start

Muss ich mich vor dem Start registrieren?

Der Gastzugang dauert 23 Minuten. Registrieren Sie sich kostenlos, um weiterzulernen, den Fortschritt zu speichern und Fehler nachzuarbeiten.

In welcher Sprache sind die Fragen?

Fragen und Antwortoptionen bleiben in ihrer Originalsprache. Die Sprache der Oberfläche können Sie unabhängig davon ändern.

Kann ich das Ergebnis als offizielles Dokument verwenden?

Nein. Dies ist eine selbstständige Übung. Das Ergebnis ersetzt keine Prüfung, Bescheinigung oder Wissenskontrolle einer zugelassenen Stelle.