Alle internationalen Übungstests auf IG MARITIME stehen Seeleuten kostenlos zur Verfügung. Registrieren Sie sich einmal, um Ihren Fortschritt zu speichern und ohne Einschränkungen zu üben.

MCQ: Flameproof Ex d

Diesen Bereich durchsuchen

Wählen Sie einen Fragensatz und starten Sie den Lernmodus oder eine Probeprüfung.

Über diesen Fragensatz

Im Bereich CompEx finden Sie Fragen zur eigenständigen Vorbereitung. Wählen Sie einen Fragensatz für den Lernmodus oder eine Probeprüfung.

„CompEx — MCQ: Flameproof Ex d“ enthält 26 Fragen in 1 Sammlung.

Lernmodus

Der Lernmodus hat kein Zeitlimit. Nach jeder Antwort sehen Sie die Auswertung und die richtigen Optionen. Sie können Fragen und Themen wiederholen.

Probeprüfung

Eine Probeprüfung dauert bis zu 60 Minuten und umfasst bis zu 50 Fragen aus dem gewählten Satz. Die Lösungen und Ergebnisse erscheinen nach Abschluss.

Beispielfragen und Antworten

Diese Beispiele stammen aus dem Fragensatz. Wählen Sie den Lernmodus für die schrittweise Bearbeitung oder eine Probeprüfung zum Selbsttest.

A function (live) test on a flameproof enclosure after some internal adjustments requires which one of the following as minimum requirement?

Eine richtige Antwort

  • Fit only the corner bolts and apply a "Danger Live" notice
  • All bolts to be replaced- spanner tight- and flamepath gaps checked✓ Richtige Antwort
  • Only one bolt fitted to support the cover and a :Danger Live" notice
  • Leave cover off, apply a "Danger Live" notice and make sure inadvertent contact with live parts is avoided
2) Which one of the following may be applied in the gap of a flameproof flanged joint to improve the IP rating?

Eine richtige Antwort

  • (I) Thermosetting sealant;
  • (II) Non setting grease;✓ Richtige Antwort
  • (III) Non-hardening grease bearing textile tape;
  • (IV) Any oil based paint.
Fitting new (metric thread) cable glands to older flameproof equipment, with imperial thread forms at cable gland entries, may be achieved by?

Eine richtige Antwort

  • Re-tapping the entries using a metric tap the same size as the gland
  • Using an Exd adaptor with appropriate thread forms✓ Richtige Antwort
  • Fitting threaded inserts after drilling
  • Fitting the metric glamd as far as possible with the aim of achieving five-full threads engagement
11) One of the design features of flameproof enclosures is?

Eine richtige Antwort

  • (I) Electric field strength;
  • (II) A gas detector and alarm arrangement;
  • (III) Flanged and/or spigot joints;✓ Richtige Antwort
  • (IV) An IP67 ingress protection level.
Obstruction of the flamepath openings of the flanged joints of Ex d enclosure by solid obstructions requires minimum clearance depending on the equipment group. For a IIC enclosure this not less than?

Eine richtige Antwort

  • 30 mm
  • 40 mm✓ Richtige Antwort
  • 10 mm
  • 50 mm

Vor dem Start

Muss ich mich vor dem Start registrieren?

Der Gastzugang dauert 23 Minuten. Registrieren Sie sich kostenlos, um weiterzulernen, den Fortschritt zu speichern und Fehler nachzuarbeiten.

In welcher Sprache sind die Fragen?

Fragen und Antwortoptionen bleiben in ihrer Originalsprache. Die Sprache der Oberfläche können Sie unabhängig davon ändern.

Kann ich das Ergebnis als offizielles Dokument verwenden?

Nein. Dies ist eine selbstständige Übung. Das Ergebnis ersetzt keine Prüfung, Bescheinigung oder Wissenskontrolle einer zugelassenen Stelle.