Alle internationalen Übungstests auf IG MARITIME stehen Seeleuten kostenlos zur Verfügung. Registrieren Sie sich einmal, um Ihren Fortschritt zu speichern und ohne Einschränkungen zu üben.

Ex e & Ex n equipment questionnaire

Diesen Bereich durchsuchen

Wählen Sie einen Fragensatz und starten Sie den Lernmodus oder eine Probeprüfung.

Über diesen Fragensatz

Im Bereich CompEx finden Sie Fragen zur eigenständigen Vorbereitung. Wählen Sie einen Fragensatz für den Lernmodus oder eine Probeprüfung.

„CompEx — Ex e & Ex n equipment questionnaire“ enthält 18 Fragen in 1 Sammlung.

Lernmodus

Der Lernmodus hat kein Zeitlimit. Nach jeder Antwort sehen Sie die Auswertung und die richtigen Optionen. Sie können Fragen und Themen wiederholen.

Probeprüfung

Eine Probeprüfung dauert bis zu 60 Minuten und umfasst bis zu 50 Fragen aus dem gewählten Satz. Die Lösungen und Ergebnisse erscheinen nach Abschluss.

Beispielfragen und Antworten

Diese Beispiele stammen aus dem Fragensatz. Wählen Sie den Lernmodus für die schrittweise Bearbeitung oder eine Probeprüfung zum Selbsttest.

18) The number of cores of different cross-sections that may be connected to any one terminal in an Ex e enclosure is?

Eine richtige Antwort

  • (I) Two, if the cores are fitted round the terminal screw in the shape of a 'U';
  • (II) Dependent on the size of the core;
  • (III) One;
  • (IV) One, unless the certification documents permit otherwise.✓ Richtige Antwort
6) A steel Ex e enclosure has a threaded entry 10mm in length. Which one of the following options achieves the minimum installation requirement when fitting an Ex e E1W cable gland?

Eine richtige Antwort

  • (I) Fit gland;✓ Richtige Antwort
  • (II) Fit gland, external IP washer and internal serrated washer;
  • (III) Fit gland, external IP washer and internal lock nut;
  • (IV) Fit gland, earth tag, serrated washer and internal lock nut.
12) Which one of the following restrictions apply to Ex e & Ex n light fittings?

Eine richtige Antwort

  • (I) Lamps using non-conducting end-caps or pins with a conductive coating unless tested with the equipment;✓ Richtige Antwort
  • (II) Lamps using conducting end-caps or pins are prohibited;
  • (III) Lamps with screwed connections are prohibited;
  • (IV) Fluorescent lamps must be bi-pin.
17) An EExd motor has an EEx e terminal box and was installed in 2005. Which one of the following meets the minimum requirement for the cable gland?

Eine richtige Antwort

  • (I) An uncertified gland complying with the IP and impact requirements for EEx e;✓ Richtige Antwort
  • (II) An El WF cable gland;
  • (III) An EEx d cable gland;
  • (IV) An EEx i cable gland.
7) For Ex e equipment installed in 2005, which one of the following glands is not acceptable?

Eine richtige Antwort

  • (I) E1W Ex e certified;
  • (II) EW1 uncertified;
  • (III) ElWF Ex d certified;
  • (IV) Uncertified plastic.✓ Richtige Antwort

Vor dem Start

Muss ich mich vor dem Start registrieren?

Der Gastzugang dauert 23 Minuten. Registrieren Sie sich kostenlos, um weiterzulernen, den Fortschritt zu speichern und Fehler nachzuarbeiten.

In welcher Sprache sind die Fragen?

Fragen und Antwortoptionen bleiben in ihrer Originalsprache. Die Sprache der Oberfläche können Sie unabhängig davon ändern.

Kann ich das Ergebnis als offizielles Dokument verwenden?

Nein. Dies ist eine selbstständige Übung. Das Ergebnis ersetzt keine Prüfung, Bescheinigung oder Wissenskontrolle einer zugelassenen Stelle.