Alle internationalen Übungstests auf IG MARITIME stehen Seeleuten kostenlos zur Verfügung. Registrieren Sie sich einmal, um Ihren Fortschritt zu speichern und ohne Einschränkungen zu üben.

Wählen Sie einen Fragensatz und starten Sie den Lernmodus oder eine Probeprüfung.

Über diesen Fragensatz

Im Bereich ANR finden Sie Fragen zur eigenständigen Vorbereitung. Wählen Sie einen Fragensatz für den Lernmodus oder eine Probeprüfung.

„ANR — EN-IEB.AEN / OE1 / 6 — IEB.AEN-Manag“ enthält 53 Fragen in 1 Sammlung.

Lernmodus

Der Lernmodus hat kein Zeitlimit. Nach jeder Antwort sehen Sie die Auswertung und die richtigen Optionen. Sie können Fragen und Themen wiederholen.

Probeprüfung

Eine Probeprüfung dauert bis zu 60 Minuten und umfasst bis zu 50 Fragen aus dem gewählten Satz. Die Lösungen und Ergebnisse erscheinen nach Abschluss.

Beispielfragen und Antworten

Diese Beispiele stammen aus dem Fragensatz. Wählen Sie den Lernmodus für die schrittweise Bearbeitung oder eine Probeprüfung zum Selbsttest.

A four-pole induction motor, operating on three-phase 60 cycle current will operate at approximately

Eine richtige Antwort

  • 850 RPM
  • 1,150 RPM
  • 1,750 RPM✓ Richtige Antwort
  • 3,550 RPM
Which of the following represents the accepted method of cleaning dust and foreign particles from electrical equipment while limiting damage to electric components?

Eine richtige Antwort

  • Carefully wiping off the components with a soft cotton rag.
  • Blowing a high velocity stream of compressed air rapidly across the components.
  • Using a vacuum cleaner to remove debris from the components.✓ Richtige Antwort
  • Using carbon tetrachloride as a cleaning solvent to clean the components.
The torque produced by a motor when its shaft will not turn, even though rated voltage is applied to the stator, is known as

Eine richtige Antwort

  • locked-rotor torque✓ Richtige Antwort
  • pullout torque
  • breakdown torque
  • torque margin
The speed of a multi-speed, squirrel-cage, induction motor operating in a fixed frequency system can be changed by

Eine richtige Antwort

  • reconnecting stator windings for different numbers of poles✓ Richtige Antwort
  • changing the RPM of the rotor flux
  • changing the phase sequence of the applied voltage
  • reconnecting the stator so that no poles have the same polarity
During start-up of the circuit shown in the illustration EL-0081, it is noted that the ends of component "C" alternately glow and become dark without the tube illuminating The most probable cause for this is thatAbbildung zur Frage

Eine richtige Antwort

  • component "D" is loose and due to the ship's vibrations makes and breaks contact
  • the power system's voltage is fluctuating in and out of the range necessary for proper operation
  • component "A" is shorted and therefore unable to produce the high voltage required to start the lamp✓ Richtige Antwort
  • component "B" contacts are opening and closing thus prohibiting sufficient current flow

Vor dem Start

Muss ich mich vor dem Start registrieren?

Der Gastzugang dauert 23 Minuten. Registrieren Sie sich kostenlos, um weiterzulernen, den Fortschritt zu speichern und Fehler nachzuarbeiten.

In welcher Sprache sind die Fragen?

Fragen und Antwortoptionen bleiben in ihrer Originalsprache. Die Sprache der Oberfläche können Sie unabhängig davon ändern.

Kann ich das Ergebnis als offizielles Dokument verwenden?

Nein. Dies ist eine selbstständige Übung. Das Ergebnis ersetzt keine Prüfung, Bescheinigung oder Wissenskontrolle einer zugelassenen Stelle.